![]() Here's what it looks like when pinging is successful: Once the IP camera and your PC are on the same network, you can ping again to verify that you can reach the IP camera. To connect to an IP camera and do initial setup you might need to change your IP address to be on the same network as the camera. To find out your PC's IP address, you use a command called, ipconfig, showed below: Often the IP address of the camera and your PC are different. 1.10 - The first three are NOT the same so they are likely not on the same network.Įxceptions do exist in advanced configurations but this rule of thumb (first three being the same) will work in most situations. Good: IP Camera address is 192.168.2.4 and PC address is 192.168.2.10 - The first three are the same (192.168.2) so they should be on the same network.Typically, this means that the first 3 segments (called octets) need to be the same. ![]() The IP camera and the PC need to be on the same network. This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply. This often happens when you first try to connect: Pinging tests whether one computer (e.g., your PC) can reach another computer (e.g., your IP camera).īelow is an example of where pinging fails. 192.168.2.144), you can then try to ping it from your PC. Once you discover the IP address of the camera (e.g. You can also try using tools built into VMS systems but the manufacturer's own tool is likely to work the best. To do so, use the IP camera manufacturer's discovery / finder tool. Examples include ACTi Utility Suite, Axis Camera Management, Arecont AV100, IQFinder, Pelco Device Utility, etc. Now we will review key areas covered inside the video.ĭiscovering the IP address of your IP camera is the first step. Here is the full video walking you through the entire process: In this report, we train networking novices on how get started using IP cameras, featuring a 9 minute video screencast and a series of screenshots showing the key elements. Getting started with IP cameras can be daunting for those without experience in computer networks.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |